Skip to content
FiftyOhm
Esc
  • Air-core coilSingle-layer air-core solenoid inductance from Nagaoka's exact coefficient, compared with Wheeler's formula. Solve for the number of turns for a target inductance.Components & magnetics
  • Attenuator PadsResistor values for Pi, T, bridged-T and minimum-loss L-pad attenuators, with unequal impedances, power dissipation per resistor and E24/E96 rounding.Couplers, dividers & attenuators
  • CoaxCoax Z0, capacitance and inductance per length, velocity factor, loss, exact TE11 cutoff and breakdown voltage. Solve for D, d or εr from Z0.Transmission lines
  • CPW / GCPWCoplanar waveguide and grounded CPW impedance, effective permittivity, dispersion, delay and loss by conformal mapping. Solve for centre width or gap.Transmission lines
  • dBm ↔ W ↔ VConvert RF power between dBm, dBW, watts, Vrms, Vpeak, Vpp, dBµV and dBmV for any system impedance. Instant, accurate, with formulas.Fundamentals & conversions
  • Differential pairEdge-coupled microstrip and stripline differential impedance, Z0 even/odd, common-mode impedance, coupling and delay. Solve for spacing or width from Zdiff.Transmission lines
  • Filter OrderMinimum filter order to meet a passband/stopband attenuation mask for Butterworth, Chebyshev and elliptic responses, with the attenuation actually achieved.Filters
  • Free-space path lossFree-space path loss from the Friis equation, received power with antenna gains, and a far-field check. Solve for distance or frequency.Propagation & link budget
  • L / Pi / T MatchingDesign lumped L, Pi and T matching networks between complex source and load impedances. Both L solutions, loaded-Q Pi/T, component values and bandwidth.Matching & Smith chart
  • LC Filter DesignerDesign lumped LC ladder filters: Butterworth, Chebyshev or Bessel; low-pass, high-pass, band-pass, band-stop to order 10, with exact insertion loss and group delay.Filters
  • LED ResistorSeries resistor for one LED or a string of LEDs: exact value, next standard E12/E24/E96 value, actual current, resistor power and recommended rating.Electronics basics

Physical constants for RF and electronics

Speed of light, vacuum permittivity and permeability, free-space impedance, Boltzmann constant and elementary charge, with CODATA values.

These are the constants the calculators on this site use. Since the 2019 revision of the SI, the speed of light, the Planck constant, the elementary charge and the Boltzmann constant have exact defined values. The vacuum permeability μ₀ is no longer exactly 4π × 10⁻⁷ H/m; it is now measured, and ε₀ and η₀ follow from it.

Defined (exact) constants

QuantitySymbolValueUnitSource
Speed of light in vacuumc0c_0299 792 458m/s[1]
Elementary chargeee1.602 176 634 × 10⁻¹⁹C[1]
Boltzmann constantkBk_B1.380 649 × 10⁻²³J/K[1]
Planck constanthh6.626 070 15 × 10⁻³⁴J·s[1]

Electromagnetic constants (CODATA 2018)

QuantitySymbolValueUnitSource
Vacuum permeabilityμ0\mu_01.256 637 062 12 × 10⁻⁶H/m[2]
Vacuum permittivityε0\varepsilon_08.854 187 8128 × 10⁻¹²F/m[2]
Impedance of free spaceη0=μ0c0\eta_0 = \mu_0 c_0376.730 313 668Ω[2]

Conventions used in the calculators

QuantitySymbolValueSource
Standard noise temperatureT0T_0290 K[3]
Thermal noise density at T0T_0kBT0k_B T_0−173.98 dBm/Hzcomputed from kBk_B and T0T_0

The noise density follows from 10log⁡10(kBT0/1 mW)=10log⁡10(1.380649×10−23×290/10−3)10\log_{10}(k_B T_0 / 1\ \text{mW}) = 10\log_{10}(1.380649\times10^{-23}\times290/10^{-3}).

Sources

  1. BIPM, The International System of Units (SI), 9th edition, 2019, Table 1. bipm.org
  2. E. Tiesinga, P. J. Mohr, D. B. Newell and B. N. Taylor, "CODATA recommended values of the fundamental physical constants: 2018," Rev. Mod. Phys. 93, 025010 (2021). physics.nist.gov/constants
  3. H. T. Friis, "Noise figures of radio receivers," Proc. IRE 32 (7), 419–422 (1944), which defines noise figure with the source at the standard temperature T0=290T_0 = 290 K.