Skip to content
FiftyOhm
Esc
  • Air-core coilSingle-layer air-core solenoid inductance from Nagaoka's exact coefficient, compared with Wheeler's formula. Solve for the number of turns for a target inductance.Components & magnetics
  • Attenuator PadsResistor values for Pi, T, bridged-T and minimum-loss L-pad attenuators, with unequal impedances, power dissipation per resistor and E24/E96 rounding.Couplers, dividers & attenuators
  • CoaxCoax Z0, capacitance and inductance per length, velocity factor, loss, exact TE11 cutoff and breakdown voltage. Solve for D, d or εr from Z0.Transmission lines
  • CPW / GCPWCoplanar waveguide and grounded CPW impedance, effective permittivity, dispersion, delay and loss by conformal mapping. Solve for centre width or gap.Transmission lines
  • dBm ↔ W ↔ VConvert RF power between dBm, dBW, watts, Vrms, Vpeak, Vpp, dBµV and dBmV for any system impedance. Instant, accurate, with formulas.Fundamentals & conversions
  • Differential pairEdge-coupled microstrip and stripline differential impedance, Z0 even/odd, common-mode impedance, coupling and delay. Solve for spacing or width from Zdiff.Transmission lines
  • Filter OrderMinimum filter order to meet a passband/stopband attenuation mask for Butterworth, Chebyshev and elliptic responses, with the attenuation actually achieved.Filters
  • Free-space path lossFree-space path loss from the Friis equation, received power with antenna gains, and a far-field check. Solve for distance or frequency.Propagation & link budget
  • L / Pi / T MatchingDesign lumped L, Pi and T matching networks between complex source and load impedances. Both L solutions, loaded-Q Pi/T, component values and bandwidth.Matching & Smith chart
  • LC Filter DesignerDesign lumped LC ladder filters: Butterworth, Chebyshev or Bessel; low-pass, high-pass, band-pass, band-stop to order 10, with exact insertion loss and group delay.Filters
  • MicrostripMicrostrip Z0, effective permittivity, dispersion, delay and loss. Solve for trace width from target impedance. Hammerstad–Jensen + Kirschning–Jansen models.Transmission lines

Free Space Path Loss Calculator (FSPL)

Free-space path loss from the Friis equation, received power with antenna gains, and a far-field check. Solve for distance or frequency.

3 cited sources8 reference checksRuns in your browser

Inputs

Power delivered to the transmit antenna terminals.

Largest dimension of the larger antenna, for the far-field (Fraunhofer) check. Enter 0 to skip.

Results

Free-space path loss(L_fs)
100.05dB
Received power(P_r)
−80.052
Net path loss incl. antenna gains(L_fs − G_t − G_r)
100.05dB
Wavelength(λ)
124.91
Far-field distance 2D²/λ(d_f)
16.011

Formulas

Lfs=20log⁡10 ⁣(4πdfc) dB=20log⁡10dkm+20log⁡10fMHz+32.45L_{fs} = 20\log_{10}\!\left(\frac{4\pi d f}{c}\right)\ \mathrm{dB} = 20\log_{10} d_{\mathrm{km}} + 20\log_{10} f_{\mathrm{MHz}} + 32.45Pr=Pt Gt Gr(λ4πd)2  ⇒  Pr,dBm=Pt,dBm+Gt+Gr−LfsP_r = P_t\,G_t\,G_r\left(\frac{\lambda}{4\pi d}\right)^2 \;\Rightarrow\; P_{r,\mathrm{dBm}} = P_{t,\mathrm{dBm}} + G_t + G_r - L_{fs}df=2D2λ,d≫D,d≫λd_f = \frac{2D^2}{\lambda},\qquad d \gg D,\quad d \gg \lambda

What this calculator does

Free-space path loss (FSPL) is the attenuation between two isotropic antennas separated by a distance dd with nothing in between: no ground, no obstacles, no atmosphere. It follows from the Friis transmission equation (Friis, 1946):

Pr=Pt Gt Gr(λ4πd)2P_r = P_t\,G_t\,G_r\left(\frac{\lambda}{4\pi d}\right)^2

The factor (4πd/λ)2(4\pi d/\lambda)^2 is the free-space path loss. In decibels,

Lfs=20log⁡10 ⁣(4πdfc)=20log⁡10dkm+20log⁡10fMHz+32.45 dB.L_{fs} = 20\log_{10}\!\left(\frac{4\pi d f}{c}\right) = 20\log_{10} d_\text{km} + 20\log_{10} f_\text{MHz} + 32.45\ \text{dB}.

Two points are often misunderstood:

  • The loss is not absorption. Free space is lossless. The power spreads over a sphere of area 4πd24\pi d^2, so the power density falls as 1/d21/d^2. The receive antenna collects power through its effective aperture Ae=Grλ2/4πA_e = G_r\lambda^2/4\pi.
  • The frequency term comes from the receive aperture. An isotropic antenna's aperture λ2/4π\lambda^2/4\pi shrinks as the frequency rises. That is where the f2f^2 comes from. With fixed-aperture dishes at both ends, the received power actually increases with frequency, because each dish's gain rises as f2f^2.

The calculator gives the FSPL, the received power for a given transmit power and antenna gains, the net loss including the gains, the wavelength, and the Fraunhofer far-field distance 2D2/λ2D^2/\lambda for the largest antenna dimension DD. Gains are in dBi and the power can be entered in dBm, dBW or watts.

How to use solve-for

  • Range for a loss budget. Solve Distance with Free-space path loss as the target to find how far a given dB budget reaches. With Received power as the target, you get the distance at which the signal falls to a receiver's sensitivity.
  • Frequency. Solve Frequency for a target loss to see how high you can go over a fixed path.
  • Power and gains. Solve Transmit power or either antenna gain for a target received power.

For a full budget with noise floor, SNR and margin, use the link budget calculator.

Worked example

The defaults are a 2.4 GHz link over 1 km with 20 dBm transmit power and isotropic (0 dBi) antennas:

QuantityValue
Wavelength λ\lambda0.12491 m
Free-space path loss100.05 dB
Received power−80.052 dBm
Far-field distance for D=0.1D = 0.1 m0.16011 m

Check the loss by hand: 20log⁡10(1)+20log⁡10(2400)+32.45=0+67.60+32.45=100.0520\log_{10}(1) + 20\log_{10}(2400) + 32.45 = 0 + 67.60 + 32.45 = 100.05 dB. Each doubling of distance adds 6.02 dB, and each decade adds 20 dB. To find the range for 120 dB of loss, solve Distance for an FSPL of 120 dB: the answer is 9.9403 km. At 5.8 GHz the same 1 km path costs 107.72 dB.

Rappaport's Example 4.2 (Wireless Communications, 2nd ed.) uses 50 W into a unity-gain antenna at 900 MHz and asks for the received power at 100 m and 10 km. Enter Pt=50P_t = 50 W, f=900f = 900 MHz and d=100d = 100 m. The calculator gives an FSPL of 71.533 dB and a received power of −24.543 dBm (3.5 µW), and at 10 km −64.543 dBm. The book gives −24.5 dBm and −64.5 dBm with c=3×108c = 3\times10^8 m/s.

Accuracy and validity

The formula is exact for its assumptions. The limits come from those assumptions:

ConditionWhy it matters
Far field: d>2D2/λd > 2D^2/\lambda, d≫Dd \gg D, d≫λd \gg \lambdaFriis assumes plane-wave incidence. Inside the Fraunhofer distance the phase error across the aperture lowers the effective gain.
No obstacles in the first Fresnel zoneTerrain or buildings inside the zone add diffraction loss.
No ground reflectionOver flat ground the direct and reflected rays interfere. Beyond the crossover distance the loss rises as 40log⁡10d40\log_{10}d (two-ray model).
Clear atmosphereOxygen and water vapour (ITU-R P.676) and rain (ITU-R P.838) add loss above about 10 GHz. Near 60 GHz, oxygen absorbs about 15 dB/km.
Matched, co-polarized antennasMismatch and polarization loss come on top. Use the link budget's extra-loss term for these.

The calculator warns when the distance is inside the Fraunhofer distance, or less than ten wavelengths or ten antenna sizes. It flags a negative path loss (d<λ/4πd < \lambda/4\pi) as unphysical. Its arithmetic is checked against exact analytic values (for example 100.05201 dB for 1 km at 2.4 GHz, and the 32.4478 dB constant at 1 km and 1 MHz) and against Rappaport's Examples 4.1 and 4.2.

Practical notes

  • dBi, not dBd. Dipole-referenced gains (dBd) are 2.15 dB lower than dBi. Convert before entering them.
  • Cable and connector losses are not part of FSPL. Subtract them from the transmit power, or use the link budget calculator, which has feed-loss inputs.
  • Indoor and urban links lose much more than free space. Empirical models (log-distance with exponent 3–4, Hata, COST-231, ITU-R P.1238 and P.1411) are better there. FSPL is the optimistic bound.
  • Radar is different. A monostatic radar has a two-way spreading loss and depends on the target's cross section, so its received power falls as 1/d41/d^4. Use the radar equation for it.
  • Satellite links. For geostationary links, use the slant range (about 35 786 km at the sub-satellite point and up to about 41 700 km at low elevation), not the altitude.

References

  1. H. T. Friis, “A Note on a Simple Transmission Formula,” Proc. IRE, vol. 34, no. 5, pp. 254–256, May 1946.
  2. T. S. Rappaport, Wireless Communications: Principles and Practice, 2nd ed., Prentice Hall, 2002, §4.2–4.3 (free-space model, Fraunhofer distance).
  3. ITU-R Recommendation P.525-4, “Calculation of free-space attenuation,” International Telecommunication Union, 2019.

This calculator's results are checked against 8 independent reference values in automated tests on every change. How we check accuracy.