Skip to content
FiftyOhm
Esc
  • Air-core coilSingle-layer air-core solenoid inductance from Nagaoka's exact coefficient, compared with Wheeler's formula. Solve for the number of turns for a target inductance.Components & magnetics
  • Attenuator PadsResistor values for Pi, T, bridged-T and minimum-loss L-pad attenuators, with unequal impedances, power dissipation per resistor and E24/E96 rounding.Couplers, dividers & attenuators
  • CoaxCoax Z0, capacitance and inductance per length, velocity factor, loss, exact TE11 cutoff and breakdown voltage. Solve for D, d or εr from Z0.Transmission lines
  • CPW / GCPWCoplanar waveguide and grounded CPW impedance, effective permittivity, dispersion, delay and loss by conformal mapping. Solve for centre width or gap.Transmission lines
  • dBm ↔ W ↔ VConvert RF power between dBm, dBW, watts, Vrms, Vpeak, Vpp, dBµV and dBmV for any system impedance. Instant, accurate, with formulas.Fundamentals & conversions
  • Differential pairEdge-coupled microstrip and stripline differential impedance, Z0 even/odd, common-mode impedance, coupling and delay. Solve for spacing or width from Zdiff.Transmission lines
  • Filter OrderMinimum filter order to meet a passband/stopband attenuation mask for Butterworth, Chebyshev and elliptic responses, with the attenuation actually achieved.Filters
  • Free-space path lossFree-space path loss from the Friis equation, received power with antenna gains, and a far-field check. Solve for distance or frequency.Propagation & link budget
  • L / Pi / T MatchingDesign lumped L, Pi and T matching networks between complex source and load impedances. Both L solutions, loaded-Q Pi/T, component values and bandwidth.Matching & Smith chart
  • LC Filter DesignerDesign lumped LC ladder filters: Butterworth, Chebyshev or Bessel; low-pass, high-pass, band-pass, band-stop to order 10, with exact insertion loss and group delay.Filters
  • MicrostripMicrostrip Z0, effective permittivity, dispersion, delay and loss. Solve for trace width from target impedance. Hammerstad–Jensen + Kirschning–Jansen models.Transmission lines

Terms of Use

Last updated: 21 November 2026

By using FiftyOhm (fiftyohm.com) you agree to these terms. If you do not agree, please do not use the site.

Engineering estimates, not guarantees

The calculators implement published closed-form and numerical models and cite their sources. Every model has limits: results are estimates that depend on the model's validity range and on the accuracy of your inputs. Real components and boards also depend on manufacturing tolerances, materials and effects that no calculator captures.

You are responsible for verifying any result before relying on it, in particular before fabrication, procurement, or any use where an error could cause damage, financial loss or injury. Confirm critical designs with an appropriate field solver, simulation and measurement.

No warranty

The site and all results are provided "as is" and "as available", without warranties of any kind, express or implied, including accuracy, fitness for a particular purpose and non-infringement.

Limitation of liability

To the fullest extent permitted by law, FiftyOhm and its operators are not liable for any indirect, incidental, special, consequential or punitive damages, or for any loss of profits, data, or business, arising from your use of, or inability to use, the site or its results.

Acceptable use

You may use the calculators for any personal, educational or commercial engineering work. Please do not attempt to disrupt the site, scrape it at a rate that degrades service for others, or republish its written content as your own. Linking to any page, including share links, is welcome.

Content and trademarks

The site's text, design and code are owned by FiftyOhm. Product and company names mentioned on the site are trademarks of their respective owners and are used only to identify them.

Advertising and third-party links

The site shows third-party advertising and links to external sites. We are not responsible for their content or practices. See the Privacy Policy for how advertising cookies work.

Changes

We may update these terms; the date above shows the latest version. Questions? See the contact page.