Skip to content
FiftyOhm
Esc
  • Air-core coilSingle-layer air-core solenoid inductance from Nagaoka's exact coefficient, compared with Wheeler's formula. Solve for the number of turns for a target inductance.Components & magnetics
  • Attenuator PadsResistor values for Pi, T, bridged-T and minimum-loss L-pad attenuators, with unequal impedances, power dissipation per resistor and E24/E96 rounding.Couplers, dividers & attenuators
  • CoaxCoax Z0, capacitance and inductance per length, velocity factor, loss, exact TE11 cutoff and breakdown voltage. Solve for D, d or εr from Z0.Transmission lines
  • CPW / GCPWCoplanar waveguide and grounded CPW impedance, effective permittivity, dispersion, delay and loss by conformal mapping. Solve for centre width or gap.Transmission lines
  • dBm ↔ W ↔ VConvert RF power between dBm, dBW, watts, Vrms, Vpeak, Vpp, dBµV and dBmV for any system impedance. Instant, accurate, with formulas.Fundamentals & conversions
  • Differential pairEdge-coupled microstrip and stripline differential impedance, Z0 even/odd, common-mode impedance, coupling and delay. Solve for spacing or width from Zdiff.Transmission lines
  • Filter OrderMinimum filter order to meet a passband/stopband attenuation mask for Butterworth, Chebyshev and elliptic responses, with the attenuation actually achieved.Filters
  • Free-space path lossFree-space path loss from the Friis equation, received power with antenna gains, and a far-field check. Solve for distance or frequency.Propagation & link budget
  • L / Pi / T MatchingDesign lumped L, Pi and T matching networks between complex source and load impedances. Both L solutions, loaded-Q Pi/T, component values and bandwidth.Matching & Smith chart
  • LC Filter DesignerDesign lumped LC ladder filters: Butterworth, Chebyshev or Bessel; low-pass, high-pass, band-pass, band-stop to order 10, with exact insertion loss and group delay.Filters
  • MicrostripMicrostrip Z0, effective permittivity, dispersion, delay and loss. Solve for trace width from target impedance. Hammerstad–Jensen + Kirschning–Jansen models.Transmission lines

dBm to Watts Converter (dBm ↔ W ↔ Volts ↔ dBµV)

Convert RF power between dBm, dBW, watts, Vrms, Vpeak, Vpp, dBµV and dBmV for any system impedance. Instant, accurate, with formulas.

1 cited source8 reference checksRuns in your browser

Inputs

Resistive load the power is delivered into (50 Ω RF, 75 Ω video/CATV, 600 Ω audio).

Results

Power
0dBm
Power
1
Power
−30dBW
RMS voltage(V_rms)
223.61
Peak voltage(V_pk)
316.23
Peak-to-peak voltage(V_pp)
632.46
Voltage level
106.99
RMS current(I_rms)
4.4721
  • Voltages assume a sinusoidal (CW) signal into a resistive load.

Formulas

PdBm=10log⁡10 ⁣(P1 mW)P_{\mathrm{dBm}} = 10\log_{10}\!\left(\frac{P}{1\,\mathrm{mW}}\right)Vrms=P Z0,Vpk=2 Vrms,Vpp=2VpkV_{\mathrm{rms}} = \sqrt{P\,Z_0},\quad V_{\mathrm{pk}} = \sqrt{2}\,V_{\mathrm{rms}},\quad V_{\mathrm{pp}} = 2V_{\mathrm{pk}}dBμV=20log⁡10 ⁣(Vrms1 μV)=PdBm+90+10log⁡10Z0\mathrm{dB\mu V} = 20\log_{10}\!\left(\frac{V_{\mathrm{rms}}}{1\,\mu\mathrm{V}}\right) = P_{\mathrm{dBm}} + 90 + 10\log_{10} Z_0

dBm, watts and volts

dBm is power relative to 1 milliwatt on a logarithmic scale: 0 dBm = 1 mW, +30 dBm = 1 W, −30 dBm = 1 µW. Each +10 dB multiplies the power by 10, and each +3 dB roughly doubles it.

To turn power into voltage you need the impedance of the load. In a 50 Ω system, 0 dBm is 224 mV RMS (632 mV peak-to-peak). In 75 Ω (video, CATV) it is 274 mV RMS.

dBµV and dBmV

EMC receivers and cable-TV equipment report voltage levels: dBµV is voltage relative to 1 µV, and dBmV relative to 1 mV. In a 50 Ω system the conversion is:

dBμV=dBm+107\text{dB}\mu\text{V} = \text{dBm} + 107

(more precisely +90+10log⁡1050=106.99+90 + 10\log_{10}50 = 106.99). In 75 Ω the offset is 108.75 dB.

Quick reference (50 Ω)

dBmPowerVrmsVpp
+301 W7.07 V20 V
+20100 mW2.24 V6.32 V
+1010 mW707 mV2.0 V
01 mW224 mV632 mV
−301 µW7.07 mV20 mV
−601 nW224 µV632 µV

All voltages assume a continuous sine wave. Modulated signals with a high peak-to-average ratio have peak voltages well above the CW values.

References

  1. IEEE Std 100, The Authoritative Dictionary of IEEE Standards Terms, 7th ed., 2000 (dBm, dBµV definitions).

This calculator's results are checked against 8 independent reference values in automated tests on every change. How we check accuracy.